Knex Folding Target Range

Intro: Knex Folding Target Range

I have been meaning to do this ible for a while now, and have only just finally got round to it... I present to you instructions for my folding target range!
I like this one compared to other models because it's relatively low piece and has two handles (one on either side) to reset the targets with ease! When a target is knocked down a red con is shown. There are two different target sizes for different accuracy/power.

Have fun building and don't forget to rate comment and follow me for more awesome stuff!!!
-cazadactle

STEP 1: Piece Count!

All the pieces:

~~CONS:~~
-Yellow x4
-red x14
-purple 3D x29
-blue 3D x7
-Grey (double port) x10
-Grey (single port) x10
~~RODS:~~
-green x3
-white x21
-blue x28
-yellow x15
-red x4
~~MISC:~~
-y-con x2
-tan clip x2
-blue spacer x16
-grey spacer x4

STEP 2: The Base

This is what everything connects to and also what makes the whole thing stand up! I know it's pretty easy but I made it step by step for those who are new to Knex... =D

STEP 3: The Reset Frame

This is what you pull to reset the targets and is connected to the base!!!

STEP 4: The Targets

These are what you hit with ammo to make them fall down...WOAH...

STEP 5: Putting It All Together

the name says it all really...Have fun with your new target range!!!

THANKS FOR BUILDING!!!

Comments

[soccer9112]

thank u so much its great with my nerf guns

[MrShadowKnight16]

What happened to that really small target?

[MrShadowKnight16]

I mean the really large target.

[wout147]

are the y-con necessary??

[cazadactle]

yep! they stop the targets leaning to far fporward and not falling over...:)

[cool knex13]

cool 2.5*

[cazadactle]

ok...

[Knexman15]

Cool!