Knex Grenadeish Thinger Mabob
Intro: Knex Grenadeish Thinger Mabob
I really liked myhailo's grenade design but it was much too delicate. I decided to make a new design and then I added a pin. It became stronger and easier to put back together. The only drawback of this design is the fact that it doesn't spread as far when it hits the ground. Be safe, responsible, and have fun building!
STEP 1: What You'll Need
These are the parts you will need.
STEP 2: The Knex Grenadeish Thinger Mabob's Shell
Follow das pictures.
STEP 3: Make the Pin
Follow dar pictures! ARRRR!
STEP 4: Loading and Useage
Attach the pin as shown in picture 1.
Load green rods or bb's into the shell as shown in picture 2-3.
Attach the last red rod as shown in picture 4.
Pull the pin and throw.
Have fun and watch the video!
Load green rods or bb's into the shell as shown in picture 2-3.
Attach the last red rod as shown in picture 4.
Pull the pin and throw.
Have fun and watch the video!
16 Comments
ssibaja 11 years ago
Seleziona 14 years ago
An Villain 15 years ago
Mintyhippo 16 years ago
I_am_Canadian 16 years ago
masterchrisx3 15 years ago
I_am_Canadian 15 years ago
An Villain 15 years ago
Galilxg3 16 years ago
wussap 16 years ago
xACIDITYx 16 years ago
Mintyhippo 16 years ago
flames10391 16 years ago
extreme builder 16 years ago
flames10391 16 years ago
PineapplebobTheGreat 16 years ago