Knex Jumping Thingy
Intro: Knex Jumping Thingy
Its a knex Jumping Thingy
STEP 1: Ingredients
THese are the pieces you will need for making a J-T.
I think you can get these pieces in most knex sets.
I think you can get these pieces in most knex sets.
STEP 2: The..top Part.
wrap two rubber-bands around the side holesin the red things. The green rods just make it look cooler.
STEP 3: The Shooty Part
To make the part that actually moves the J-T, take a blue rod, and add 5 orange rods. It is important that you have that space between the 4th and 5th orange thingies.
STEP 4: Attach
Attach the top to the launcher like in the picture. remember to add andother blue rod...
STEP 5: Final Step..
add the grey rodthrough the circle in the orange things, and attach it to the red thing.aim the straight up on the ground,pull the orange thingy down, and let go. it should only go up about a foot, but you could use different kinds of rubber bands and see what kind is best...
15 Comments
Brixtrix 3 years ago
smidge147 17 years ago
Bartboy 15 years ago
chopstx 14 years ago
gunnerguy 16 years ago
The Jamalam 15 years ago
panzerunit5 16 years ago
gunnerguy 16 years ago
gobob29 17 years ago
Knex Builder 17 years ago
Nikolizer 17 years ago
mickey shimitz 17 years ago
hobo lord 17 years ago
nurd 17 years ago
PetervG 17 years ago