Introduction: Knex Magazine
This is my Knex magazine, it is is spring loaded it holds 7 green rods and is no more than 5 or 10cm tall.
Step 1: Making the Bass
this is the bass of the magazine. just copy what is on the pictures.i apologise about the second picture but all you do is attach 2 yellow pieces on either side of the orange pieces.
Step 2:
sorry about the picture again but you should be able to see everything I've done.
Step 3:
just make the piece pictured and attach it like it is in the second picture.
Step 4:
again sorry about the pictures but just make the firing pin in picture 1 (you can use different length of rods) and attach it as shown in picture 2. and there you have your magazine.