Knex Micro SMG

Introduction: Knex Micro SMG

About: Hey everyone, you may have noticed i left for a good 6 months or so. Well im back and i hope you will all enjoy my work to come. Thanks bye! And one more thing... lets try to be a bit creative with our guns a…

Another gun i've made.

Credit:
40% to DJ radio for answering my question, thus showing me how to make a good barrel.
40% to Killer~SafeCracker for his idea for the barrel from the T.B.A.P.
20% to me for the gun.
Thanks guys! :)

Ammo: blue rods
Holds as many as you want, mag size can be increased easily.

Feedback is important to me for improvement
Sorry, some pictures are blurry.

Step 1: First Layer

Make these.
Make your handle.
Add your gray/white rod where tagged.

Step 2: Second Layer

Make these.
Add them on.

Step 3: Trigger

Make as the picture shows.
Add it in here.

Step 4: Handle

Make this.
Add it on here.
Make this.
Add it on here.

Step 5: 3rd Layer

I lost the picture for this but your basically mirroring the other side, Easy.

Step 6: Ramrods, Mag Pushes, and Banding, Oh My!

Top: ramrod
Bottom: mag push

band your trigger like so on both sides.

You can really band your gun however you'd like.

Trigger

Lost the picture with the band But it goes here.

Step 7: Top Sight

Make this.
Add it on top.

Step 8: Finished Product and Mods

Your finally done! Have a cookie!

If you want more delatiled instructions for mag and/or handle just let me know.

Be the First to Share

    Recommendations

    • Summer Fun: Student Design Challenge

      Summer Fun: Student Design Challenge
    • Make it Fly Challenge

      Make it Fly Challenge
    • Metal Contest

      Metal Contest

    10 Comments

    0
    ~KGB~
    ~KGB~

    11 years ago on Introduction

    looks like an el diablo ripoff

    0
    MrSillyGuns
    MrSillyGuns

    Reply 11 years ago on Introduction

    I've never actually explored instructables and this gun is made all by my imagination, i'm sorry if it looks like another gun.

    0
    ~KGB~
    ~KGB~

    Reply 11 years ago on Introduction

    ahhh.. suppose its ok for a starter...

    0
    DJ Radio
    DJ Radio

    11 years ago on Introduction

    So I guess you were too busy fixing the barrel that you neglected every other aspect of the gun.

    0
    MrSillyGuns
    MrSillyGuns

    Reply 11 years ago on Introduction

    That's not true because I added a mag and handle XD. Yes I was a little concerned about the barrel but I did make some mods that are on the last step if you'd take a look and this gun shoots pretty far.

    0
    DJ Radio
    DJ Radio

    Reply 11 years ago on Introduction

    By "neglect" I meant that you spent so much time trying to make a good barrel that you made everything else kinda bad. I notice you did fix the handle in the last step so that's good.

    0
    Mr. Muggle
    Mr. Muggle

    11 years ago on Introduction

    you should make the handle a bit longer, I think I can barely hold that. Other than that it's a very decent gun

    0
    MrSillyGuns
    MrSillyGuns

    Reply 11 years ago on Introduction

    I only made it so small cause i was running out of green rods. Thanks for the feedback :).