K'nex Milk Crate
Intro: K'nex Milk Crate
We were having promblems keeping our milk bottles upright, so i decide to try and solve the problem. I created this, A K'nex milk bottle crate. It can hold upto 4 milk bottles and has the strength to hold 4 full bottles.
Lets get building!
STEP 1: First Section
Picture 1: Build
Picture 2: Second Angle
Pay close attention to the placement of green (or black) and white (or silver) rods. Also pay attention to the base pattern.
STEP 2: Second Section
Picture 2: Second Angle
Again pay close attention to the placement of the rods and the base pattern.
STEP 3: Center Piece
Should be easy.
STEP 4: Handle
Picture 2: place together as shown.
STEP 5: Handle [2]
Picture 2:Second angle
STEP 6: Handle [3]
Connect them as shown. Remeber the spacers.
STEP 7: Connecting
Picture 2: Connect as shown.
STEP 8: Adding the Handle
It can be connected in and direction.
You have now finished! Now you can keep your milk bottles from falling!
Thanks for building! if you liked it Comment and Rate! If you want more, Subscribe!
14 Comments
Randomguy65 13 years ago
Tom Buckey 13 years ago
Kona-chan 10 years ago
TigerNod 13 years ago
Anyways, nice instructable. Just something simple and unique.
Tom Buckey 13 years ago
erikos kostarikos 13 years ago
I'll give it 4.5* because the looks could be a little bit better.
It looks strong enough to hold some bottles, I will try it out soon. =]
Tom Buckey 13 years ago
erikos kostarikos 13 years ago
~KGB~ 13 years ago
Tom Buckey 13 years ago
~KGB~ 13 years ago
NatNoBrains 13 years ago
Tom Buckey 13 years ago
Tom Buckey 13 years ago