Knex Mini-uzi - - Updated V1.2 - -
Intro: Knex Mini-uzi - - Updated V1.2 - -
Based on the Mini-Uzi.
Simple, easy to build knex gun based on the Mini-Uzi. This gun fires white rods and has a working magazine.
Parts:
Barrel/Breech
Magazine + Magazine ram
Ram
Trigger
Body/handle
Forward grip
UPDATES:
Magazine ram
Ram
Trigger
Barrel/Breech
Body/handle
Simple, easy to build knex gun based on the Mini-Uzi. This gun fires white rods and has a working magazine.
Parts:
Barrel/Breech
Magazine + Magazine ram
Ram
Trigger
Body/handle
Forward grip
UPDATES:
Magazine ram
Ram
Trigger
Barrel/Breech
Body/handle
STEP 1: Barrel/Breech
Build the barrel and breech.
Build all the parts first, then assemble as shown in the last three images.
The update is on the fifth image
Build all the parts first, then assemble as shown in the last three images.
The update is on the fifth image
STEP 2: Body and Handle
This is one of the easiest parts of the gun. Just look at the pictures.
STEP 3: Ram
This is the easiest part of the gun.
NOTE: The bands go through the hole in the middle - bands must be snapped, fed through hole and then re-tied.
NOTE: The bands go through the hole in the middle - bands must be snapped, fed through hole and then re-tied.
STEP 4: Trigger
Another easy part.
Update is third image
Update is third image
STEP 5: Magazine + Magazine Ram
This part is trickier. Look carefully at the pictures. The second and third pictures show close ups of parts.
NOTE: The second picture shows what the two black and white things are in the forth picture. (Top, center)
Updates are shown in the last three pictures
NOTE: The second picture shows what the two black and white things are in the forth picture. (Top, center)
Updates are shown in the last three pictures
STEP 6: Forward Grip
This is another really easy part. Just look at the picture.
I know that actual mini uzi's don't have handles like this but it just makes it easier to aim.
I know that actual mini uzi's don't have handles like this but it just makes it easier to aim.
STEP 7: Assembly
Assembly of the gun. Bringing all of the pieces together. Follow the pictures.
STEP 8: You're Done!
Hopefully you've made the gun and it works fine.
And hopefully. you haven't gotten stuck or confused. If you have, just let me know and i'll give you a hand .
And hopefully. you haven't gotten stuck or confused. If you have, just let me know and i'll give you a hand .
117 Comments
ProtectTheAlphaWolf 7 years ago
imagine that! and you didn't even use any cut parts!
( :O
barrett50cal 14 years ago
the_boss_builder 12 years ago
Mace! 13 years ago
poellmac 13 years ago
knex gun maker 15 years ago
RMConstruction 14 years ago
Millawi Legend 13 years ago
MrSillyGuns 13 years ago
lphillips094 13 years ago
TigerNod 14 years ago
muffinslayer2 14 years ago
coolin 14 years ago
knexsniper1 15 years ago
lioneatr 14 years ago
metroid_crafter 14 years ago
lioneatr 14 years ago
knex gun maker 15 years ago
knex gun maker 15 years ago
zzpman 15 years ago