Introduction: Knex P259 Pistol
The gun doesn't shoot anything but it's good Enjoy :)
Supplies
1 white piece
2 blue rods
11 yellow or gray half pieces
4 purple pieces
6 red fourth pieces
18 white rods
22 green rods
2 orange joining pieces
1 gray 45° connector
1 blue pyramid panel
3 black stoppers
2 green connectors
4 rubber bands
Step 1: Make Barrel
Make the build in the picture.
Step 2: Make 2 of These Barrels
Make another barrel, same as step 1.
Step 3: Put These Barrels Together
Use 3 white rods to join the two Barrels.
Step 4: Put Purple Pieces
Put two purple pieces on the back of the barrel using green rods.
Step 5: Make the Body
Make this build like in the picture.
Step 6: Make 2 Body Pieces
Make another body piece, exactly the same.
Step 7: Put the Body Together
Use white rods to join the two parts you built.
Step 8: Join Barrel to Body
Use this triangular blue piece to join the barrel and body. Use two white rods and black stoppers.
Step 9: Build Trigger Piece
Build the trigger using 2 blue rods, one white piece, one half gray or yellow piece, one white rod and one 45° is gray piece.
Step 10: Add 4 Rubber Bands
Add 4 Rubber Bands as shown.