Introduction: Knex PSP Case

By CLICK HERE!
About: Hey everyone, welcome to my Instuctable, or my Instructables page. Well I hope you like what you see and if you do, don't forget to SUBSCRIBE. I like to build just about anything from airsoft guns to fishing l…

Have you ever needed a case for your PSP? Do you have some K'nex laying around? Then this is project for you! The case can hold your PSP(Slim, but I don't know if the others will work. Please let me know if they do.) and two games. It also includes a handle, and a case lock. Don't forget to rate, comment, and subscribe. Well stop reading this and get building.

Well I decided to make a piece count for everyone who wanted to build this so here it is:

Connectors
Gray(1 Slot)=10
Red(3 Slot)=9
Yellow(5 Slot)=16
Purple 3D=24
Blue 3D=4
White(8 Slot)=24

Rods
Green(Approximately)=54
White=31
Gray=1

Miscellaneous
Y Connectors=4
Blue Spacers=2
Gray spacers=13
Tan Clips=6
Blue Clips=4
Hinges= 2 Sets
Green rod normal to micro size=2





Step 1: Top


This is the top, if you follow the pictures and it should be easy.

Step 2: Bottom

Time for the bottom!

Step 3: Handle

Step 4: Assembly

Time to assemble.

Step 5: How to Use


Now your done, but you need to know how to use.