Introduction: K'nex Pencil Holder
Hi, Welcome to my second instructable. This one is a simple pencil/pen holder.
I will guide you through everything.
Lets start with the "PROS AND CONS!"
PROS:
It keeps your pencils and pens in one place.
CONS:
It has no bottom
Well enough talk, lets build!
I will guide you through everything.
Lets start with the "PROS AND CONS!"
PROS:
It keeps your pencils and pens in one place.
CONS:
It has no bottom
Well enough talk, lets build!
Step 1: Gather Your Pieces.
Well before we can start we're going to need some pieces. Follow the photos or Just read the list below
Red Rods:24
Green Rods:16
Green Connectors:16
That's all you need, So once you get those press the button down here.
\/ \/
Red Rods:24
Green Rods:16
Green Connectors:16
That's all you need, So once you get those press the button down here.
\/ \/
Step 2: The Rims
Hello, and welcome to step 2. I am pretty sure you have gotten all the pieces you need. So I will now tell you what pieces you need for this step
PIECES YOU WILL NEED:
16 Green Rods
16 Green Connectors
Now comes the hard part. Building it! (just kidding)
Just follow the photos. It seems simple enough.
When you are done just press this button
\/ \/
PIECES YOU WILL NEED:
16 Green Rods
16 Green Connectors
Now comes the hard part. Building it! (just kidding)
Just follow the photos. It seems simple enough.
When you are done just press this button
\/ \/
Step 3: The Sides
Welcome to step 3. I am sure you completed step 2. So now now that you entered step 3 we should probably continue.
First gather these:
24 Red Rods
Now just follow the photos and you should be fine. If you are confused, the rods will snap into the triangle gaps you get between the connectors.
Almost Done Just click this Button
\/ \/
First gather these:
24 Red Rods
Now just follow the photos and you should be fine. If you are confused, the rods will snap into the triangle gaps you get between the connectors.
Almost Done Just click this Button
\/ \/
Step 4: Your Done! Enjoy!
Congrats, You made it to the end of the Instructable.
And one more thing, please:
Comment
Subscribe, or
Take a look at one or more of my other posts:
https://www.instructables.com/community/Is-this-possible-1/
https://www.instructables.com/community/What-Do-you-think-of-these-jokes/
https://www.instructables.com/id/KNEX-MACHINENO-NAME/
Thank you! My next instructable will more advanced.
And one more thing, please:
Comment
Subscribe, or
Take a look at one or more of my other posts:
https://www.instructables.com/community/Is-this-possible-1/
https://www.instructables.com/community/What-Do-you-think-of-these-jokes/
https://www.instructables.com/id/KNEX-MACHINENO-NAME/
Thank you! My next instructable will more advanced.