Introduction: Knex RBG Plasma Pistol (Better Instructions)
This is a KNEX Halo Plasma Pistol. Please remember that I did not make this. This gun is property of Halo 123 Guns. He created this gun from Halo 3. Once again, it is a gear RBG (rubber band gun) plasma pistol from the hit shooter game Halo. I made this instructable for easier instructions.
*Some Mods. By Me*
Step 1: The Frame
The frame of the gun is what is shown below. Be sure to make two of them, one for each side.
Step 2: Some Add-Ons
Here are some add-ons to the frame.
1-2) Filler Thingy
3) Where the Filler Thingy Goes
4) Another Filler Thingy
5) Where the other Filler Thingy goes
6) Once again...hm... what is it?... oh yeah, a... FILLER THINGY
7) Where the last filler thingy goes
Step 3: Firing System and Trigger
This is the firing system. Instead of a white connector with eight white rods for the rubber band holder, it uses two gears, giving it the maximum hold of 35 rubber bands. The trigger is pretty simple.
1) Make two of these
2) The Trigger
3) Where It All Goes (sorry for blur)
Step 4: The Handy Handle Helper
This is just three yellow connectors on a blue rod attached to the handle.
1) Attach this to the handle.
Step 5: The Top Rail
Just a rail. The rubber band goes on here.
1) Make this
2) Add These
3) And These
Step 6: FINISHED!!!
I think you get where the rubber bands go. As for the trigger, get a rubber band and stretch it on both sides to the third rod from the trigger.
Be the First to Share
Recommendations
Raspberry Pi Contest
Jewelry Challenge
One Board Contest
78 Comments
11 years ago on Step 2
umm what is the filler thingy i can't figure out how to build it
11 years ago on Introduction
it's huge.
12 years ago on Introduction
is this semi auto? i love semi auto
Reply 11 years ago on Introduction
It's pseudo semi-automatic, whereas you load the rubber bands on then pull the trigger to fire. ALL YOU DO TO FIRE IS PULL THE TRIGGER REPETITIVELY. That's what makes it so fun. :)
Reply 11 years ago on Introduction
:D
Reply 12 years ago on Introduction
it is semi auto in the sense of 'pulling the trigger and firing'. (like my halo gun) However, it is a completely debatable topic, so I was unwilling to put 'Semi-auto' on this one. (also, this model isn't mine)
11 years ago on Step 1
this is a good photo. it really helped me because of the PoV you used.
11 years ago on Introduction
cool!
12 years ago on Introduction
Well that's quite cool!! I just might build and make it shoot connectors.
Reply 12 years ago on Introduction
ooodammo sounds like a better path...
12 years ago on Introduction
ITS NOT A PLASMA PISTOL. its looks more like a spiker.
Reply 12 years ago on Introduction
i will make a plasma pistol!!!!! actually i did Look lol watch for a slideshow or instructable!! It is blunt force and it hurts like Heck lol.
Reply 12 years ago on Introduction
//www.instructables.com/id/Plasma_Pistol_From_Halo_123/ ] That is mt link for my pistol Slideshow.!
13 years ago on Introduction
i mean iff u make the rubber bands attached u can make some mag i the middle so the rubber band will ake the rod s\to the end. Cuz the rubber band shoots off, But now to ROD and the RUBBER BAND wil go together so you will have a gun that shoots like 20 bullet,s without reloading .. xD
13 years ago on Step 3
my trigger doesn't work it end up already touching the gears and not being able to move
Reply 13 years ago on Introduction
its supposed to touch the gears. It turns the gears.
13 years ago on Introduction
Hey man i came with a idea but now really able to make it jet its just an idea, Behind the rubberbands. Make some magazine so it can shoot rods wirhout reloading all time xD try making it (can be usefull this xD)
13 years ago on Introduction
Check out my Plasma Rifle
13 years ago on Introduction
is pineapple bob the great sgt milk on youtube??!!! or were u just showing him that video just because?
Reply 13 years ago on Introduction
Are you talking about the genious who made that big halo gatling gun thing? No, that's not me... ( I totally wish it was me)