Introduction: K'nex Rubberband Gun/Pistol
This is my K'nex Rubberband gun that can shoot up to 4 rubberbands at once. It is really simple to build and use.
Step 1: COLLECT THE PEICES
9 green connectors
13 yellow connectors
4 red connectors
11 gray connectors
4 red connectors
2 tan clips
1 black connector
1 snowflake
1 blue rod
29 green rods
23 white rods
1 rubberband (for trigger)
Step 2: BUILD
Build the picture below.
Step 3: BUILD
Connect white rods in the specified places and use your snowflake connector to create a barrel.
Step 4: BUILD
Step 5: BUILD
Place gray connectors in between every white rod.
Step 6: BUILD
Place the Black connector where it belongs. Make sure it is facing the right direction or else your barrel won't be able to move.
Step 7: BUILD
Build the trigger and place it on your gun using 2 tan clips and a blue rod.
Step 8: BUILD
Finish the end of your gun.
Step 9: RUBBERBAND PLACEMENT
Set up your rubberband to where your trigger is nice and strong.