Introduction: Knex SlingBow
Kind of a Slingshot but kind of a bow/crossbow.
Step 1: Handle
Build the handle. 12 orange connectors and 4 yellow rods.
Step 2: Main.
Build the main part of the Sling.
Step 3: Part 3
Add 4 orange connectors.
Step 4: Add Parts Together.
Add the handle and main part together,dont worry if it bends its ok.
Step 5: Part 2
add in the parts seen here.2 yellow connectors 8 gray small connectors,4 blue rods,4 red connectors and 2 orange connectors.
Step 6: Step 6
this is how the blue rod will connect to the orange connectors thats to to the right and left of the main part of the slingshot.u ned 4 gray connecters inbetween the blue rods on each side.
Step 7: Step 7
add the red rods to the yellow connectors that go on the main part of the slingshot and add the other peices shown in the pic.
Step 8: Step 8
add the orange connectors onto the red rods to reduce the bend of the sides.
Step 9: Step 9
add the rubberband like shown, and on the side that u want to shoot it out of pull the rubberband under the yellow peicem so it doesnt interfere with the firing.
Step 10: Finished
And there is your bow,this is how to fire it.The gray rods work best.And your supposed to hold it with one hand and pull it back with the other but i couldn't take a pic of it if i did that.