Introduction: Knex Sniper
Hi this is my knex sniper which can shoot over 100ft with a red rod with a red connector at the end. It shoots about 50 ft with a blue rod out of the magazine.So here It is.
Step 1: Parts List
Connectors:
White:27(all can be substituted for blue connectors)
Blue:4
Yellow:34
Green:9
Red:16
Grey(2 slot):3
Grey(1 slot):16
Orange:10
Rods:
Green:186-I think
White:72
Blue:1
Yellow:1
Red:5
Grey:2(use a black rod if you have one)
Misc:
Yellow Flexi:1(for comfort)
Y-clips:28
Hinge:1
Ball Socket:1
I don't think that this is 100% correct so plz do correct me if i made a mistake.
Step 2: Body
Build both but do not connect.
Step 3: Innerds
Build The Pieces That function and reinforce the gun.
Step 4: Assembly
Assembly
Step 5: Go Shoot It
You get a cookie for completeing it!