Knex Truck Steering

by cyberman471

1.2K54

Intro: Knex Truck Steering

Just so you guys know the steering is a little bit wrong so if you turn it to the left the wheels will go to the right

STEP 1: One

Make this and do not forget the steering wheel

STEP 2: Two

Make this

STEP 3: Three

Make this six times

STEP 4: Four

Make this this is the base

STEP 5: Five

Make this six times

STEP 6: Six

Add five and four

STEP 7: Seven

Make these make the rods with two orange connectors make it one time and make the rod with the red connector three times

STEP 8:

Add six and seven together like these and dont forget to lock them

STEP 9:

Add two and step 8 together

STEP 10:

Add seven in the middle of step 9 and do not forget to lock them

STEP 11:

Add seven and step 10 in the top and dont forget to lock them

STEP 12:

Add another seven to make the top part and midle part of step 11 meet and dont forget to lock them

STEP 13:

Lock all of the white connectors

STEP 14:

Then add one and step 12 or 13 to close the system and attach the steering whell to two

STEP 15:

Put three on step 14

3 Comments