Knex Battle Car - "The Base"

2,233

4

30

Introduction: Knex Battle Car - "The Base"

if you like this ceck out my group "knex battle cars" and post your own or see my future releases.

This a fun thing to do when you are bored, have a lot of Knex, but no rubber bands. this shows how to make a fun knex "battle car". me and my friends used to do this all the time. make two "battle cars" and crash them into eachother from accross the room, the first one to lose all thier wheels loses.
this is a very simple version of the battle car, and there is a million ways to customize it, i hope to see a bunch of different versions pretty soon.

It works best on flat sufaces (aka, concrete, hardwood floor, ect.)

oh and this is my first instructable, so critisize all you want, but be constructive, no "this sucks" unless you have a fortified reason.

DISCLAIMER - This has the ability to hurt people and or damaging property, and breaking knex peices, i am not responsible for anything you do to yourself, others, property or anything else you manage to destroy.

Step 1: Materials

here is what you will need.
by te way the wheels, mine only has three but you can use 4 if you want

Step 2: The Frame.

Just build the frame.
get the blue 3d connecters, two red rods (remember mine are green, i will be refering to them as red though)
and two yellow rods. attach them together as the picture shows.

Step 3: Add the Wheels.

Mine has three but obviously you can ad more if you want.

1. Add the wheels to the yellow rods, and use the red connectors as spacers. (you can use the blue rings too. I just didn't have any.

2. Just make sure they are at somewhat even.

Step 4: ADD ThE WEAPONS!!! (in Govonators Voice)

1. create one of the "hooks"

2. take anothe blue "3d connector"

3. attach two white rods on opposite sides.

4. next attach a green rod one slot over from one of the white rods.

5. attach two red corner connectors together as shown in the picture and then attach one white rod on the open end of the red connector.

6. repeat steps 2-5.

7. connect them together by a yellow rod.

8. and attach them to the whehichle on the one wheeled side.

Step 5: Create Some Defense

you will notice that the battle car is a little wobbly, so we need to add some support that will also work as some defense.

just create 2 of the first picture.

now add a little more suport by attaching a green rod on one of the open slots on the battle bot.



THATS IT YUR DONE!!!

now this is a very simple version. i want to see a bunch more versions out there. i have keppt my best creations for a little while so if you want to see some of my 5 years worth of experience ideas, hen you must put up some of your own :). have fun!

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest
    • Anything Goes Contest

      Anything Goes Contest

    30 Discussions

    0
    bighead5454
    bighead5454

    11 years ago on Introduction

    hey if you made 2 small block triggers from 2 rods, a few yellow connector and the block trigger each gun and mounted it on the car so that if another car hit it the car would shoot the ammo therefore totaling the other car

    0
    holeman666
    holeman666

    12 years ago on Introduction

    really fun! i used to do this but wioth leg trains, and then put them on track, and ram as hard as possible :p

    0
    XI3
    XI3

    Reply 12 years ago on Introduction

    lol cool man, hope to see some of your own versions soon.

    0
    holeman666
    holeman666

    Reply 12 years ago on Introduction

    i might do that :p but first i go finish my how to make a paper model gun instructable

    0
    XI3
    XI3

    Reply 12 years ago on Introduction

    lol yah sounds good. join my group, im tryin to get more people into these battle cars, heir really fun once you start getting more advanced with them. im making an advancement for this one to, it is a crazy strong axel for the front wheel. this thing is impossibly strong, put it this way, ive had knex peices break before popping off ths lol it will be on my next knex battle car "The Block" check it out!

    0
    bighead5454
    bighead5454

    Reply 12 years ago on Introduction

    hey i have an idea for a battle car make it like this one but put a large spike between the two red arrow like thingys sticking out the hook the spike up to the top that woulld do major damage to the otheers battle car

    0
    bighead5454
    bighead5454

    12 years ago on Introduction

    add some remote controlled motors (an instructable on this site tell how to make em) and a steering system and then crash them into each other that would do A LOT of damage but you would need a LOT of support

    I used to do this when I was 10. My trick was to put alot of wight in the back of the car. The more pices the better. Very good work for your first Instructable. 4.0 :D

    0
    Skreetsha
    Skreetsha

    Reply 12 years ago on Introduction

    Lol, i do battlebots style! xD I used to put 'em on ropes and then pull up to my rival (a friend) and ram ,ram, ram! xD I made one with a wedge that owned heavily! :D

    0
    Skreetsha
    Skreetsha

    Reply 12 years ago on Introduction

    :O Thats kinda heavy XD Mine was a replica of Bad Additude featured on Battlebots :P

    0
    Skreetsha
    Skreetsha

    Reply 12 years ago on Introduction

    Lol, i hate it that the show is gone :( Btw, think i should post my dune buggy??? Pics are on your orangeboard :P

    0
    Skreetsha
    Skreetsha

    Reply 12 years ago on Introduction

    Yeah here too! I'm not free of school but, it snowed XD Although it is melting already :(