Introduction: Knex Bipod....for All Guns Like the Siparani Rifle
follow the pics dude.
Step 1: The Hinge
this joins the rifle to the legs of the bipod
Step 2: Legs and Feet
this is what the rifle stands on follow any notes
IN SOME OF THE PICS THE FEMALE BALL AND SOCKET JIONT IS THE WRONG WAY> IT HAS TO BE PIONTING away!!!!!!from the green connector
Step 3: Part-assemly
follow pics, second pic means reapeat step2, but use a male b-a-s instead of a female b-a-s
Step 4: Assembly
step 1+step 3.
the flappy grey bits on the hinge connect to the red rods on the legs+feet.
make sure that the pattern on the hinge goes
side on grey, slide on grey, red rod from leg 1,slide on grey, red rod from leg 2,b-a-s connector,slide on grey, red rod from leg 1slide on grey, red rod from leg 2,side on grey.
Step 5: Mod the Gun to Fit the Bipod
basically, when building the barrel, replace ont orange connector with a yellow one, and add a white(or whatever leanth you need to have the tip sticking out from the bottom of the barrel)rod
Step 6: Unfolding
Step 7: Folding Part 1
Step 8: Folding Part 2