Introduction: Knex M1 Carbine
Oh my god It's here! my carbine...
specifications:
60+ feet range with rod bullet and no fins (with only 2 #64 rubber bands...!) Or 100+ feet (with 5 #64's)
around 50+ or so feet per second (my Ak-47 with same mechanism and power got that...might post if get requests)
power = 1 inch penetration of very thick cardboard box with sharpened red rod on yellow connector at 1 foot of range =) Or with 5 rubber bands at a few feet with a yellow rod on yellow connector it pierced all the way and the connector went halfway through the box. =)
magazine: don't work as a magazine because its a sling mechanism (they own) but it can hold bullets:number varies on type of bullet)
stock: from the winchester
made to compete with: I don't know, maybe all those carbons with clip trigger system?
Step 1: Parts Lists =)
I've always wished all Knex guns had these... so I made one for you!
Parts
connectors:
Yellow:66
orange:32
green:16
white:4
grey:3
Rods:
white:59
blue 3d:5
green:97
yellow:6
Other:
Y connector:10
Step 2: Barrel
The short thin thing on the front of the rifle. Here are instructions
1: what you're making
2:make 2
3:supports on 1
4:make
5:add
6:connect and done!
Step 3: Body
The hardest part... get ready
1: make
2:supports+rails
3:connect
4:make. trigger parts
5:more trigger parts
6:and some more trigger parts
7: bit blurry but put top of trigger in
8:put bottom in and done!
Step 4: Magazine
pretty simple. just a place to put extra bullets really.
1:make 2
2:supports
3:make 2
4:place
5:connect and done!
Step 5: Handle/stock
the same as the one on the winchester rifle but a diffrent handle.
make the stock here(credit to tomboyrme)
2:handle. make 2
3:top view
Step 6: Connecting
The final step!
1:stock/handle to body
2:body to barrerl
3:body to magazine
This gun is done!
Step 7: Loading+firing
hot to load and fire
1:lock the trigger
2+3:rubberise the trigger
4+5: rubberise the barrel
6: put bullet in place
7:pull to fire
Step 8: Total Pwnege
lol look at my pwnege puppy dog!
81 Comments
8 years ago
Yo dude! the pics on this are really blurry
Reply 8 years ago
If you want me to, I can make a new instructable with a lot clearer pics, interested?
9 years ago on Introduction
love it!
once i turned it into a M1 Garand
and once i turned it into a sniper riffle
good job!
but me mag doesn't really has a function
10 years ago on Introduction
I will try to convert it an m14 ebr
10 years ago on Step 7
is there any accetories for this gun?
10 years ago on Introduction
this gun owns!!!!!!!!
I built it. went like 110 feet!
10 years ago on Step 4
do you need that?
10 years ago on Introduction
looks more like an m14.
but m14's look better than an m1 carbine!
the stock is a little skeletal. but good job anyways!
11 years ago on Step 8
awwwww
13 years ago on Step 2
I did want to to say what that guy demomdragon that you did make first what you want to make.Then how in steps.. better then by other guns1 :D:D:D:D I give you a rate for 3,5 for the gun and +1 for the instructions that mean I give a 4,5 for the gun.and that instructons
Reply 11 years ago on Introduction
wowowow....now im gonna tell it in normal english (at least i try)
What i dit want to say.That that demondragun...wtf i cant translate my own words???
11 years ago on Introduction
why dont you create some sights.anyway pretty good gun i will try to build it when i have time.use some grey connectors for the back sighthttp://youtube/m1 carbine/.com
12 years ago on Step 1
nice gun!
12 years ago on Step 3
please. really.
12 years ago on Step 1
what is a 3d;5
12 years ago on Introduction
Uhmmmm... ALL MY SLING GUNS HAVE MAGS. And pumps... And one has a lever............
12 years ago on Introduction
nice gun !owns. 5.0!
12 years ago on Step 8
lol that will pwn anything, any day, anywhere!!!!
=)
12 years ago on Step 8
cute =)
12 years ago on Step 3
could u try to get another pic