Knex Life-size Energy Sword!
Intro: Knex Life-size Energy Sword!
I recently posted a forum, And some of you guys wanted me to post them. so here's one!
Also, since the sword is symmetrical I will only be making half of it, so make 2 of everything except the handle.
Also, since the sword is symmetrical I will only be making half of it, so make 2 of everything except the handle.
STEP 1: The Handle
simple enough.
STEP 2: Handle Connectors
make this. note the yellow connectors have been cut to fit on the handle.
STEP 3: The Outer Blade
just make this. these are all flexible rods.
STEP 4: The Inner Blade
you will want to make this
STEP 5: Connecting the Inner and Outer Blade
follow the pictures. Too easy I only need 1 picture
STEP 6: The Inner Blade Cont.
don't ask why it's in this order, it just is easier this way
STEP 7: Connecting Inner Blade Peices
just follow the picture. ok?
STEP 8: Connect Handle to Supports, and Connect Supports to Blade
the name of the step explained it all.
STEP 9: Connecting Both Sides
do it!
STEP 10: Making Connectors
just follow what you see.
STEP 11: Adding the Connectors
yep.
STEP 12: YAY!! You Did It!
you have finally completed making your energy sword!
92 Comments
danroy99 12 years ago
Hellchild 12 years ago
cholden 13 years ago
Hellchild 13 years ago
Hellchild 13 years ago
So if you wanted to swing it around and such you would have to connect it somewhere in the middle.
Doctor Who 15 years ago
Hellchild 15 years ago
bighead5454 14 years ago
bounty1012 14 years ago
bighead5454 14 years ago
bounty1012 14 years ago
bighead5454 14 years ago
grotle1231 14 years ago
Landon Sullivan 14 years ago
bighead5454 14 years ago
Landon Sullivan 14 years ago
bighead5454 14 years ago
An Villain 14 years ago
bighead5454 14 years ago
An Villain 14 years ago