This is a mech warrior/battle mech that i have made from the top of my head with no instructions and have made this. if you want it to be a robot, simply put on the head. there is also attatchment. if you have mprovements or attatchments please inform and ask for permission to post one with my desgn.
please rate and subscribe :) !

the 4th picture was done by my younger brother who is 7, it was made out of mini knex.

i hate people who dont put piece counts, it takes a couple of minute and saves us lots of time.

these are for the whole thing, attatchments are next. if you dont have any ball sockets then i have made an alternative, this can be found in the arm section, im sorry but unfortunately i havent done a piece count but it is easy enough
connectors:
red- 16
yellow/half moon-8
white/full moon-2
green-11
grey(2 connection)-2
y connector-6
purple 3d-6
blue 3d-2
blue (like the tan clips)-2

rods:
green/black-18
whte/silver-22
blue-10
yellow/sparkly grey-1

attatchments=

jet pack:
orange connector- 2
y connector- 2
grey connector (1 connection)-2
blue connector- 2
black small wheel with holes around-2

spiked sword:
y connectors-9
ball joint-1
yellow bar-1

shield:
red connector-3
yellow connector-1
white connector-1
green bar-7
white bar-7

sword:
yellow bar-1
orange connector-1
whte bar-1

gun:
orange connector-2
red connector-1
whte bar-2

Step 1: Legs

these are the legs
1)build these
2)another view
3)another view
4)attatch yellow bar

Step 2: Body

1)build the body
2)different view
3)different view
4)different view
5)different view

Step 3: Arms

1)build arms
2)different view
they are a bit flimsy, have you got any better ones?

the alternate arms connnect to the red pieces shown on the first arm.

Step 4: Head (optional)

1)the head
2)different view

Step 5: Building

this is just putting everything together.
in picture three and four the right arm is in lock position.

in the 3rd picture the blu bars should clip into the half moon connector to ensure the head doesnt fall out.

Step 6: Attatchments

these are the attatchments, if you have any of your own please tell me, and if you want you can make a real firing gun for it, i had an idea but cba building it.

the pictures show what they are and where to put them.
1-sword, shield, and gun
2-sword and shield, the white bars for the shield have been taken from the shoulder
3-the gun
4-spiked sword
5-go's on the hand/fingers
6-jet pack
7-go's on the back, you dont need the head, but need some bars for it connect to, preferably blue.

Step 7: SUBSCRIBE

SUBSCRIBE PLEASE!!!!!!!!!!!!!!!! :)

Introduction: Kne'x Mech Warrior/robot.