LED Night Light
Intro: LED Night Light
STEP 1: Plug the 9v Battery Into It's Holder.
STEP 2: Plug the Battery Leads Into the Breadboard.
STEP 3: Plug the LED Into the Breadboard.
Make sure that the longer leg on the LED is on the left side of the breadboard.
STEP 4: Connect the Resistor to the Shorter Leg of the LED.
The resistor color code is "brown, black, red".
STEP 5: Add the Switch.
Connect one wire from the switch to the longer leg of the LED and connect the other wire from the switch to the resistor.
Comments
Gushik 9 years ago