Introduction: LED Logo Rammstein on Bicycle

Hello I am from Russia. I like bike and LED. I do LED bicycle wheels: but i want more...
I love rock and I like the rock band Rammstein, so I decided, in addition to lighting on the wheels make the glowing logo on the frame of my bike.
Project completed 31/12/10
2 hours before the New Year!

I want to show you the process of creating.
I sorry for my bad English, I use a translator.

Step 1: Step 1

measured the shape of the paper

Step 2: Step 2

Transferred to the tree, the outer panel was meant to be out of it.

Step 3: Step 3

Use paper baking transferred logo on the tree, but decided to use a plastic panel, which sheathe the walls, and it was decided to make the front panel of it, and the wood used to frame construction (later the tree will be connected with wooden sticks).

Step 4: Step 4

Also changed the size of the insert, it seems to me if it is not on top of the frame, and just close the gap between them will be better.
Logo on the plastic panel.

Step 5: Step 5

Void between wood paneling, I closed the foam

Step 6: Step 6

I bought a lamp from the ceiling and cut him out of the right glass

Step 7: Step 7

Painted design elements in black.

Step 8: Step 8

The very stones of which was described above, they stand on 3 corners and joined with wood panels forming the framework of sticks in holes drilled through which the tie that will keep the entire structure.
Took its place foam insert.

Step 9: Step 9

Did the red edging logo.

Step 10: Step 10

Pasted frame and the inside of the glass foiled tape

Step 11: Step 11

LEDs secured in the foam.

Step 12: Step 12

Secured inside the LED and pasted all the foil.

Step 13: Step 13

Secured with screws exterior plastic panels with the logo of Rammstein, for pieces of wood stuck in the corners of pieces of rubber that sticks do not knock on the window frame. Beautifully turned out though!

Step 14: Final Foto on My Bike.

The finished result, made 2 hours before the New Year!, Even thought it would be so cool glow at night!
Insert a two-way logo and the right and left lights on both sides too.
Congress of the fireworks in the New Year with new lighting!

Step 15: Foto With LED Bicycle Wheels.

Additional photos from the LED on Wheels.

Step 16: Foto of the Birthday of the City.

Foto of the birthday of the city.
My friends from Saint Petersburg came to me in the holiday town. Together we went to fireworks. People do foto with our bikes. So cool =)