LIGHTS DRIVEWAY AUTOMATIC

Introduction: LIGHTS DRIVEWAY AUTOMATIC

Hello everyone after losing so many nights to the PC , I managed to develop the sketch that I needed , it may be useful to someone , this allows to design simple , as in my case, turning on the lights in the driveway of the house in two stages eg . (First phase ) from 18:00 pm to 01:00 am permanently , ( II phase ) from subsequent 01:00 am to 4:00 am only to the passage and / or movement of people , this to save some electricity , because in my opinion it makes no sense that the drive stays on unnecessarily at night unless I fall in house at that hour or guests leave.

Step 1: NECESSARY MATERIAL

ARDUINO UNO or MINI-PRO;

CLOCK MODULE RTC DS1307 ;

MOTION SENSOR MODULE - PIR;

RELAY MODULE.

Step 2: SCHEME ASSEMBLY

Step 3: CODICE ARDUINO

I hope that this project can be useful to someone , sorry if it is not written correctly , I used the translator of " google " Hello

Be the First to Share

    Recommendations

    • Rice & Grains Challenge

      Rice & Grains Challenge
    • Puzzles Challenge

      Puzzles Challenge
    • Lamps Challenge

      Lamps Challenge

    2 Comments

    0
    DIY Hacks and How Tos

    That looks like a great way to set to the lights for a driveway.

    0
    Giovanni Lodato
    Giovanni Lodato

    Reply 7 years ago

    In fact, personally I find it useful