Introduction: Lamp: “Kaktus"

By
About: <3 Otis/PD/Student

A table night stand inspired by cactus.

Materials:

MDF Board.

Red/Light Gray Spray Paint.

Glue gun

Superglue

Spray Paint Protector.

Different Colors' Small Light bulbs

Electronic Candle.

Step 1: Ideation

The lamp "KAKTUS" mainly inspired by nature plants, the plant inspired me is cactus, I get my color inspiration from the flower of the cactus and the gray tone of the stabs of the cactus.

Step 2: Materials

-MDF BOARD

-RED/GRAY SPRAY PAINT

-GLUE GUN

-WOODSHOP

-SUPERGLUE

-COLORFUL LIGHT BULBS

-FAKE CANDLE

Step 3: LASER CUT

Preparing laser cut files on AI, then send to the laser cut, after 1-2 days you can get your laser cut board.

Step 4: Put Parts Together

Use glue gun, super glue, wood glue to put ll parts together.

Step 5: Spray Paint the Light.

Protect different parts by use paper and tape, use different spray paint color the different parts.

Step 6: Finish the Spray With Protector

After spray paint, use the spray protector to add a shine-look for the light.

Step 7: Finish!

The finish look at night.