Launcher of Doom-Office Version
Intro: Launcher of Doom-Office Version
There comes a time in every persons life where they get the sort of attitude "My God. I Need to do something to end the eternal boredom." Or at least they want to shoot high powered projectiles like a modern day bow and arrow.
Its taking forever to upload Notes on the picture, so i cant seem to do it.
Its taking forever to upload Notes on the picture, so i cant seem to do it.
STEP 1: Materials
You will need.
-One large Rubber band.
-One Pen, note: the pen should be one of the "cheaper" kinds that have the inside cartridge, a pull on, pull off cap.... My recomendations are either a Bic or "Just Basics".
-Adhesive Tape. My recomendations are "Nashua Tape" its sort of grayish.
Tools:
Scissors.
Your Hands.
-One large Rubber band.
-One Pen, note: the pen should be one of the "cheaper" kinds that have the inside cartridge, a pull on, pull off cap.... My recomendations are either a Bic or "Just Basics".
-Adhesive Tape. My recomendations are "Nashua Tape" its sort of grayish.
Tools:
Scissors.
Your Hands.
STEP 2: Preparing the Pen.
Normally you can just take the cap off and write, but we want to get that hollow interior. Most pens carry a small cap at the rear, and you can sort of yank that off and the pen comes out.
Now whats left is the tip. Just cut that off.
Now whats left is the tip. Just cut that off.
STEP 3: Applying the Band.
You want to get the large rubber band and cut about a quarter from it. You want to leave it so that the center is hitting the back of the pen, and both sides are around 1 thumbs width from the far tip. Holding bothsides together, you want to then wrap it tightly in tape, around 3 times over.
STEP 4: Fire Away.
Damn this thing is powerful. so watch what you do.
Comments
Plo Koon 13 years ago