Learn to Sew: Placing the Pattern on Knit Fabric
Intro: Learn to Sew: Placing the Pattern on Knit Fabric
Sandra Betzina shows her daughter, Kim, how to determine which pattern pieces will be needed and how to get the pattern pieces properly laid out on the fabric
STEP 1:
Looking at the guide sheet, find the section marked “layout.” Find the layout for the view you are interested in making. Locate the layout for your fabric width, and circle it.
STEP 2:
Move the major pattern pieces onto the fabric.
STEP 3:
Consult your suggested layout and see if any of the pattern pieces are placed on the fold. This will be indicated on the pattern piece as well.
STEP 4:
Anchor the pattern piece to the fabric.
STEP 5:
Consult “layout” for approximate placement of each pattern piece on the fabric. Remember that the grainline on the pattern is parallel to the selvages of the fabric.
STEP 6:
For more information, read Sandra ’s article, “Cutting Out”.
Subscribe to Sandra's blog and get more Learn To Sew advice!
Subscribe to Sandra's blog and get more Learn To Sew advice!
3 Comments
jeco5 14 years ago
Jayefuu 14 years ago
Sandra Betzina 14 years ago
Thanks so much for your comment! Great to hear that you found the article useful.
All of the articles reside at PowerSewing.com because the Learn To Sew Series is also featured on several other sites and it is much easier to have the articles in a central location since some of the sites do not provide a place for written content.
Happy Holidays!