Introduction: Leather Billfold

About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.l…

You can have this acrylic pattern here:

The finished size is: 4.3" x 3.7" x 0.8" (11cm x 9.5cm x 2cm).


Leather: 2.0mm (5oz) leather for surface, size 25cm x 10cm.

1.0mm(2.5oz) leather for lining, size 27cm x 30cm.

Hardware: 5cm x 8cm plastic foil.

Tools: If you are a new leather player, try to considerate to have tool kit here:

Step 1: Cut All Leather Pieces From Acrylic Pattern, and Punch Stitching Holes Use Chisel.

Step 2: Glue the Plastic Foil on Flesh Side of Photo Slot.

Step 3: Use Sand Stick to Rough the Edges, Then When You Paint Glue, It Will Glue Firmly.

Step 4: Sew First Card Slot on Card Slot Back Leather, Only Sew the Bottom Stitching Line.

Step 5: Glue Photo Slot On, Here You Can Iron a Logo As Your Need. Only Glue the Edges.

Step 6: Glue the Finished Part on Lining, Only Glue Sides.

Step 7: Do the Same for Right Part.

Step 8: Sew Left Part Top Stitching Line.

Step 9: Sew Right Part Top Stitching Line.

Step 10: Sew Left Part Vertical Stitching Line.

Step 11: When You Arrive Here, Stop Sewing.

Step 12: Glue Surface Leather With Lining Leather.

Step 13: And Go on Sewing, But Sew Surface and Lining Together, Then You Will Get a "L" Shape Stitching Line on Surface.

Step 14: Now We Do the Same Steps for Right Part.

Step 15: Nothing Is Better Than a Handmade Wallet.