Leather Clutch

Introduction: Leather Clutch

About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.leathercraftpattern.com www.l…

You can download this pdf pattern from here:


The finished size is about: 11" x 7" x 2" (28cm x 18cm x 5cm).

Hardware: No.3 zipper 40cm x1, No.3 zipper slider x2, No.5 zipper 30cm x1, No.5 zipper slider x1, Fabric.

Leather: 2.0mm (5oz) leather about 33cm x 50cm, 1.0mm (2.5oz) leather about 50cm x 29cm.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...

Step 1: First, Let Me Show You How to Make a Zipper.

Step 2: Paint Glue on Flesh Side of Card Slot Around Card Slot Opening.

Step 3: Fold and Glue Card Slot Lining on As Picture Show, Redo Step 2 and Step 3 Until Glue 3 Lining on Seams of Card Slot Leather.

Step 4: Punch Stitching Holes in the Middle of Card Slot Leather and Sew It.

Step 5: Sew Card Slot on Clutch Leathe.

Step 6: Glue No. 3 Zipper on Clutch Lining.

Step 7: Fold Zipper Pocket Fabric As Picture and Sew 2 Sides.

Step 8: Draw Stitching Lines Around Zipper Hole.

Step 9: Glue Zipper Pocket on Leather.

Step 10: Sew Around Zipper Hole, the Zipper Pocket Is Finished. Here You Can Do the Other Zipper Pocket of Back Surface Leather.

Step 11: Thin Edge of Receipt Slot Leather, Fold and Glue, Then Stitching the Top Stitching Line.

Step 12: Sew Other 3 Sides on the Other Piece of Clutch Lining.

Step 13: Rough All Edges Before Sewing, Then When You Paint Glue On, They Will Be Glued Firmly.

Step 14: Thin the Bottom Edge of 2 Pieces of Clutch Surface Leather, and Sew Them Together With Bottom Strengthen Leather.

Step 15: Thin the Edge of Top Surface Leather, Fold and Glue.

Step 16: Sew 2 Pieces of Surface Together by Flesh Side Outside.

Step 17: See How to Sew Bottom Construction.

Step 18: Glue Redundant Edge on Flesh Side.

Step 19: Converse Grain Side Outside.

Step 20: Now We Put Sewed Lining Combination Into the Surface Clutch.

Step 21: Sew No.5 Zipper Between Lining and Surface to Finish This Clutch.

Step 22: Glue No. 3 Zipper on Clutch Lining.

Be the First to Share


    • Lamps Challenge

      Lamps Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Rice & Grains Challenge

      Rice & Grains Challenge