Introduction: Leather Crossbody Bag

About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.l…

You can have this acrylic pattern from here:

The finished size is about: 8.7" x 5.9" x 2.8" (22cm x 15cm x 7cm).

Hardware: 21cm No.5 zipper x1, No.5 slider x2, 18mm magnetic button button x1, 20mm bar needle buckle x1, 9mm x 4mm Chicago screw x2, 10mm x 8mm Chicago screw x1

Leather: We advice 2.0mm (5oz) leather for main body, size 34cm x 50cm, 1.0mm(2.5oz) leather for lining, size 20cm x 45cm, 2.0mm(5oz) leather for shoudler strap, size 50cm x 2cm, and 120cm x 2cm.

Tools: If you are a new leather player, try to considerate to have tool kit here:

Step 1: First Let Me Show You How to Install Zipper.

Step 2: Cut All Pieces From Acrylic Pattern and Punch Chisel Holes. First Let Us Sew Gusset With Welt Leather, Wet the Gusset's Edge to Make a Better Shape.

Step 3: Sew Zipper on One Piece of Inner Pouch.

Step 4: Fold the Redundant Tip Cloth to Middle Side.

Step 5: Sew the Other Piece With Zipper. Here Please Notice Only Sew Zipper Part Stitching Line.

Step 6: Install Magnetic Button on Main Body Leather and Flap's Surface Leather.

Step 7: Glue Flap's Lining With Surface and Then Make Shoulder Strap Holes.

Step 8: Sew Flap With Main Body, Here Please Notice We Also Sew Inner Pocket Other Zipper Part On.

Step 9: Sew the Other 3 Stitching Line to Form the Inner Pouch.

Step 10: Now Sew 2 Pieces of Gussets With Main Body Leather.

Step 11: Now We Make Shoulder Strap, I Only Offer Detail Pictures Without Words.