Leather Storage Bag

Introduction: Leather Storage Bag

About: We are a professional leather pattern design and tool development studio, we offer high quality pdf, acrylic patterns, and high quality leather tools. We have 2 online stores: www.leathercraftpattern.com www.l…

You can have this acrylic pattern from here: http://www.leathercraftpattern.com/leather-storage...

The finished size is: 9.1" x 5.7" x 1" (23cm x 6.5cm x 2.5cm).

Advice:

Leather: We advice 2.0mm (5oz) leather for surface, size 25cm x 35cm; 1mm (2.5oz) leather for lining, size 38cm x 92cm;

Hardware: No.5 zipper 70cm x1, No.5 slider x2, No.5 zipper 15cm x1, 633 Snap x3, 655 snap x5.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...

Step 1: Firstly, Here I Add Some Pictures to Show You How to Make a Zipper.

Step 2: Cut All Leather Pieces Use Acrylic Pattern.

Step 3: Sew Small Pockets on Right Place According to the Stitching Line.

Step 4: Install Snaps On.

Step 5: Now We Do the Same As the Other Piece, Sew Small Pockets On, Glue Notebook Slot on Don't Sew, Also Don't Sew the Left Side of Phone Slot (we Will Sew Then With Surface Leather Together at the Last Step).

Step 6: There Are Lots of Combination for You to Choose As Your Need. Here Let Me Show You One With Side Zipper.

Step 7: Align 2 Half Zipper Hole Together to Sew the Finished Zipper On, Then You Get One More Pocket.

Step 8: Glue Zipper on Lining, This Is a Very Skillful Work by Hand, Here Let Me Show You a Long Picture for Teaching How to Glue Zipper.

Step 9: Finally Sew Surface Leather With the Lining, the Bag Is OK

Be the First to Share

    Recommendations

    • Plastic Contest

      Plastic Contest
    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest

    Discussions