Introduction: Lego Rifle With Chainsaw
I got the idea of the chainsaw from davison112 and i made all of his halo guns,which are awesome by the way,and added it to my rifle. its simple and easy to make!
Step 1: Bits & Pieces
you need 2 claws, a megaphone, a connector, well, just look at the pic.
Step 2: The Main Body
put the (connector) on the stick and put the megaphone on the end.
Step 3: The Mag
this step is kinda hard. you have to take the three 1x1 square plates and ange them ontop of each other. You dont have to angle them but it makes them look cooler.
Step 4: The Chainsaw
attach the horizontal claw plate to the cone anp put the chainsaw's handle in the cone.
Step 5: Attatching the Chainsaw
just attatch the claw of the chainsaw piece to the stick.
Step 6: Attatching the Mag
hook the claw to the stick behind the chainsaw
Step 7: Attatching the Scope
put a claw directly in front of the megaphone and attatch the scope piece to that
Step 8: The Stock Cntnd.
I annded a claw to the front of the mega phone and that was my handle and added a wrench kind of thing to the handle of the megaphone to make it look fuller. srry about there being no pics.
Step 9: Done!!
i hope u liked it and this was my first instructable so giv me some tips. Bye!!