Introduction: Lego Wireless Mouse (part 2)
I could never find my mouse in my backpack or when I was carrying my computer in one hand with the mouse on it, and stuff in my other hand, the mouse would always fall off my computer. So I thought how I could fix this problem so I came up with the Lego wireless mouse!
Step 1: Check Out Part 1
If you try to do this project, check out my previous instructable because you won't be able to make this build without the first part
Step 2: Measure and Cut
I measure the usb hole that was useless now because of the Lego that I put on to protect the receiver. So I measured the hole and the Lego and cut the Lego and the hole so they would fit with keeping the Lego still connectable.
Step 3: Glue
I then glued the Lego into the hole and held it in there until it held itself
Step 4: Sand
I used some sandpaper to make the Lego and mouse even. I made sure to keep the Lego flat so it could still connect with other Legos.
Step 5: Glue Some More
I glued another 1x2 Lego on to the receiver so I could be able to connect the mouse to the receiver.
Step 6: Done!
This project turned out really cool. The Lego mouse fits really well together with the computer in between. Thanks for looking through my instructable and your comments are highly appreciated!