Introduction: Lego and Rubber Band Pistol

By

Pistol made with standard Lego parts and rubber bands. The magazine can hold 6 bullets.

You pull the firing pin back and it gets locked in. When you pull the trigger, the firing pin releases and pushes the top most bullet out of the barrel.

The exact range depends on tension of the rubber bands. The one I made has a range of about 10 feet.

Step 1: Parts Required

Step 2: Barrel

Step 3: Trigger

Step 4: Hook Above the Handle

Step 5: Magazine

Step 6: Add a Rod on the Other Side of the Barrel

Step 7: Add a Rod in the Hook

Step 8: Barrel

Step 9: Lock Both Sides

Step 10: Bolt

Step 11: Rubber Band

Step 12: Load Bullets

Step 13: Finished (from Different Angles)