MAKING HATS 101
Intro: MAKING HATS 101
Intro
STEP 1: Step 1
Lay Your fabric out on the table.
STEP 2: Step 2
Measure 11 inches up and 23 inches across and mark with your marking tool. (Make sure the long sideg goes with the grain.)
STEP 3: Step 3
cut out the fabric.
STEP 4: Step 4
lay out fabric, fold in half twice in the same direction
STEP 5: Step 5
print template and pin to the fabric.
Go to (p2designs.com/pdfs/EasyFleeceHat.pdf to download and print a pattern)
Go to (p2designs.com/pdfs/EasyFleeceHat.pdf to download and print a pattern)
STEP 6: Step6
Cut out around the TOP of the template
STEP 7: Step 7
Take off the pins and unfold
STEP 8: Step 8
Fold in half and pin the outsides.
STEP 9: Step 9
Sew along both sides
STEP 10: Step 10
fold hat so that the remaining two sides meet and then pin
STEP 11: Step 11
sew the sides you just pined
STEP 12: Step 12
Trim the remaining thread
STEP 13: Step 13
fold an inch lip around the bottom
STEP 14: Step 14
pin the lip you folded
STEP 15: Step 15
sew the lip 3/8 from the bottom.
STEP 16: Step 16
wear your hat, and look awesome!! ;) :) :0
2 Comments
sasmzb 5 years ago
elvishgirllove 9 years ago
On step 9 and 11, how far in did you sew from the cut edge?