Introduction: Magazine Fed Pistol With Holster! NOW WITH TRUE TRIGGER!!!
This is my first pistol I have posted, but I have also made a moded killerk, mykhailo's semi-auto (the one on the forum) and one just for fun. It shoots green rods about 35 feet accurately, but 65 feet is the farthest with two elastics. This pistol can be equipped with a scope, bi-pod, stock, grenade launcher you name it. I am not including any of those in this instructable, but you can make those yourself. I am posting a rifle soon and that will include a bi-pod, scope, R.I.S front grip and maybe a grenade launcher. Read more on the last step of these instructions. and now it is updated!
The holster is the first I know of on the site. I don't know if it is the first, but that is what I'm hoping. You can mod it with bendy rods and other stuff if you like, but please give me credit. The stereotype holster clips to the leg, I used a simpler belt holster.
I give credit to knexgunfan for the idea, killer6 for the mag design and every knex gunner willing to build this! Have fun, don't hurt anything and be safe.
Mintyhippo is not liable for destruction of property, injury or death
DON'T FORGET TO RATE!
just kidding about the death! =-)
Step 1: The Mag Handle
This is the mag / handle. Loads green rods through the bottom.
Step 2: Ram, Fireing Pin, Whatever You Want to Call It
Do what ever you want for the back of the ram, but keep the yellow connectors and the tan clip on.
Step 3: Barrel and Chamber
You can use yellow connectors, orange or white for this step, but keep the whites I tell you to use.
Step 4: Put It Together
Elastic placement and placement of parts.
Step 5: Trouble Shooting
1. The pusher doesn't push the round all the way into the chamber.
1. Could be a jam, push lightly to see if it was just crooked. If you can't push it in, unload the mag and reload OR push the rounds on the side. (look at the second picture)
2. The round doesn't come out of the barrel.
2. The barrel is probably made from bent rods. Make sure that the rods aren't bent and if they are, replace them.
3. JAM, JAM, JAM!!!!
3. Make sure there is a lot of tension pulling up the pusher OR put a blue spacer in-between the tan clips of the chamber.
Step 6: Holster
The holster is easy and effective. It clips to the belt and fits most pistols.
Step 7: New Weponry (updated)
Sorry not posting anymore my computer crashed and I already took it apart.
But I will post this new one
90 Comments
10 years ago on Introduction
how the hell do you get the rounds to go into the barrel properly
11 years ago on Introduction
Not bad!
13 years ago on Introduction
Thats pretty funny to see that knex guns are still alive. I thought that we did everything except semi auto. But I havent really seen anything to revolutionary since I went on today. Thanks for liking this stuff but I probably will not post anything knew related ever again. Im a junior in highschool now soooooooo ya. I'm really into airsoft now so i might post some instructables on how to modify/Upgrade them. So if your interested in that stuff look for it soon
13 years ago on Step 3
oops
13 years ago on Step 3
--------------------
o o
---------------------- teh face or chez burger
15 years ago on Step 3
nice gun and a bit clearder pics would also be nice could you try pls
Reply 13 years ago on Step 3
I agree.
14 years ago on Introduction
Argh! My rounds keep on getting stuck at the top of the mag. It just twists there at the top and jams.
14 years ago on Introduction
thats a uzi
14 years ago on Step 4
y is it so blury . i cant see were to put the elastic bands could u tell me were the ones on the top go and the ones on the bottem go
14 years ago on Step 2
Fireing= Wrong - Firing = Right
14 years ago on Step 6
Dood Seriously Beast Gun And Holster I like Rifle When You Going To Make instructable?
14 years ago on Step 4
holy fu** my favorite gun is this one i put 10 rubber bands on it it put a hole in my wall 0.o
14 years ago on Introduction
where do i put the rubber bands i cant figure out? :(
14 years ago on Step 2
do u need the brokn rubr bnd b4 the ornge connector?
14 years ago on Introduction
needs a better holster, that would get stuck. Try something like mine
15 years ago on Introduction
holster isnt great wither - needs to be more compact
15 years ago on Introduction
I love the realism but the performance isnt quite up to scratch. If you could improve the reliability of the mag and make the mag INSIDE the grip itself that would be sweet.
15 years ago on Step 2
nvm
15 years ago on Step 2
whats that peice on the second yellow cuz it's a little blury