Make a Bind Plug

A Bind plug is used for binding a Transmitter with a Receiver. Most of the time I used to lose my bind plug. It may be cheaper to buy, but the shipping time will be the problem. So let's make one

Step 1: Gather the Supplies

• Female header pin
• soldering iron with accessories
• small piece of wire
• wire stripper
• heat shrinks (optional)
• hot air gun or match box to shrink the sleeve

Step 2: Cut the Female Header Pin

Step 3: File the Edges of the Header Pin

Step 4: Make Sure It Fits to the RX

Step 5: Hold It

click here

https://www.instructables.com/id/EXTRA-HANDS-FOR-SOLDERING-OCTOPUS/

Step 6: Strip Both Ends of the Wire

Step 7: Add Flux to the Joints

Step 8: Solder

Step 9: Remove the Center Pin (optional)

Step 10: Shrink It

Step 11: There You Have a New Bind Plug Made by Yourself. Enjoy Flying!!!!