Make a Loop Using Only on End.

By in OutsideSurvival

244

4

Introduction: Make a Loop Using Only on End.

By

Made for survival purposes

Step 1: Take the Extra Cordage (the Side With the Most Cordage) and Push It Though the Loop Hole. My Thumb Is Covering the Piece of Rope in the Picture

Step 2: It Should Look Like This.

Step 3: Now Tighten It Up and You Have a Basic Slip Knot

Be the First to Share

    Recommendations

    Stitch and Glue Canoe With Cedar Strip Top
    Stitch and Glue Canoe With Cedar Strip Top by georgechapman in Water
    42 3.2K
    Be Seen! 3D Printed Bike Lights With Fusion 360
    Be Seen! 3D Printed Bike Lights With Fusion 360 by Kevr102 in Bikes
    32 4.3K
    Building a Backyard Rocket Fort
    Building a Backyard Rocket Fort by Garage_Shop_Crafter in Woodworking
    55 4.9K
    Buggy Trike
    Buggy Trike by uersel in Bikes
    106 13K

    • Origami Speed Challenge

      Origami Speed Challenge

    • Make It Modular: Student Design Challenge

      Make It Modular: Student Design Challenge

    • Science Fair Challenge

      Science Fair Challenge

    Comments