Make a Battery Cell Holder Out of 2 Soda Bottle Caps

by ovestein

2.0K67

Intro: Make a Battery Cell Holder Out of 2 Soda Bottle Caps

Here Her is how I made a 1.5v battery cell easy connetet too  easily connected to wires.


7 Comments

prestux 12 years ago

Excellent idea.
Holding it together with a section of bicycle inner tube would make replacing the battery much faster/easier and would save on electrical tape. And you could possibly use the tubing for waterproofing as well.

ovestein 12 years ago

If only I had a bicycle inner tube, to test this idea. :-)

prestux 12 years ago

Check with the bike shops in your area.
They may have some that are being thrown away because of some form of damage, sections of them are still perfectly useful for our purposes.

There are many uses for old inner tubes, check out some of the clever Instructables on this site regarding possible uses.
Here is one for example:
https://www.instructables.com/id/10-of-1000-Uses-for-Old-Bicycle-Tubes/
.

CaseyCase 12 years ago

Here is how I made a 1.5v battery cell easily connected to wires.

ovestein 12 years ago

next time I'll use Google translator :-)