Make a Safety Pin From a Paperclip!
Intro: Make a Safety Pin From a Paperclip!
out of safety pins ? grab a paperclip and a needle nose pliers!
I'll show you how you can make a simple and reliable safety pin from a regular office paperclip.
you don't have to use pliers , you can do it with scissors or a ruler!
lets start!
I'll show you how you can make a simple and reliable safety pin from a regular office paperclip.
you don't have to use pliers , you can do it with scissors or a ruler!
lets start!
STEP 1: Bending the Paperclip
first straighten the paperclip , then use the pliers to bend the paperclip to form the wanted shape - like in the picture.
watch the video to see exactly how to do it.
watch the video to see exactly how to do it.
STEP 2: This Is It! You Are Done!
congrajulations! now you have a safety pin.
I hope you find this short instructable interesting and useful!
yours
Raviv
I hope you find this short instructable interesting and useful!
yours
Raviv
29 Comments
Forgotten_Memories 7 years ago
?
charge11595 14 years ago
btw, great photos
thing 2 14 years ago
carver 16 years ago
Top Dog 16 years ago
bad_dog 16 years ago
hidethecake 16 years ago
Doctor What 16 years ago
MrRedBeard 16 years ago
cubemonkey 16 years ago
Chris Bilton 16 years ago
!Andrew_Modder! 16 years ago
WurdBendur 16 years ago
jongscx 16 years ago
WurdBendur 16 years ago
jongscx 16 years ago
Cut it at an angle... kind like ===/ /=== only a steeper angle... AND you're using a decent pair of angle cutters, pliers, anything where two wedges clamping together (don't use shears, it will come out wonky)... you will come out with Two sharp points (one on the piece you want to keep, the other on the waste piece)
WurdBendur 16 years ago
jongscx 16 years ago
pocketwatch 16 years ago
TraumaComet 16 years ago