I like making stamps and other things like that. And I also like the Instructables Robot. So here's an Instructable Robot stamp!

Step 1: What You Need

You will need:

Craft foam
Glue
Scissors
Juice bottle cap or something similar
Pen

Not shown but still needed:

Paint
Paintbrush

Step 2: Draw the Robot Onto Some Craft Foam

Don't make it too small otherwise it will be very hard to cut it out and cut put the holes.

Mine looks kind of weird but he'll do. I'll cut the legs to look better. He is being compared to a quarter here.

Step 3: Cut Him Out

Take your scissors and cut him out. Then cut out the eyes and the buttons and stuff on him.

Step 4: Glue

Now flip him over and put some glue on the back. Flip him over and put him on the juice lid.

Step 5: Getting Ready to Stamp

Take your paintbrush and put a good amount of yellow paint on the stamp (except for the wheels and ear-like thingies, put black on the wheels and red on the ear-like thingies), being careful not to over-do it. If the paint gets where you don't want it to be just wipe it off with a paper towel.