Make Your Own Bottle Cap Pins
Intro: Make Your Own Bottle Cap Pins
What do you do with all of those bottle caps? Find out what you can do with those bottle caps here, make your own pins. All you need is duct tape, bottle caps, safety pins, and a big eraser.
STEP 1: Getting Your Materials
What you need for this project is,
- Bottle caps of your choosing
- Duct tape
- big eraser
- Safety pins
- A knife
- Bottle caps of your choosing
- Duct tape
- big eraser
- Safety pins
- A knife
STEP 2: First What You Need to Do Is Cut the Eraser
First you will need to cut the eraser in to rectangles that will fit long ways in the cap. Make sure that when you put the eraser in the cap that it doesn't fall out.
STEP 3: Attaching the Pin
With the knife make a slanted cut in the eraser short ways, about 1/3 or less deep. put the side of the safety pin that doesn't open into the slit. Put a small amount of duct tape on top of the slit (make sure it covers the whole back).
STEP 4: Finishing Up
Put the eraser in the cap and you have a pin.
15 Comments
threecheersfornick 16 years ago
ItsTheHobbs 16 years ago
chuirreat 16 years ago
AdamK 16 years ago
TheCheese9921 17 years ago
Bryia_026 16 years ago
13yoInvenor 17 years ago
TheLobb 17 years ago
MrCakes14 17 years ago
13yoInvenor 17 years ago
paulgeering 17 years ago
13yoInvenor 17 years ago
TheCheese9921 17 years ago
13yoInvenor 17 years ago
mrbob1000 17 years ago