Introduction: Make Your Own Yoyo Lube
I have been wanting some yoyo lube but I can't find any around where I live and all the lube on the Internet costs too much, so I decided to try and make my own and here it is it works very well.
Items needed:
vastiline
WD-40 or some other lubricant
small container
cotton ear swabs
bearing yoyo
small stick or something to stir with
Step 1: Vastline
Add about 2 table-spoons of vastline to your container.
Step 2: WD-40
Add some WD-40 i spray it for about two and a half seconds.
Step 3: Stir
Stir your concoction of WD-40 andvastiline for about one minute.
Step 4: Apply
Apply this sticky slick combonation to your yo-yo bearing with an ear swab. And there you have it your own homeade yoyo lube.
11 Comments
Question 3 years ago on Introduction
does it work for responsive yoyos
6 years ago
It is good
12 years ago on Introduction
just use baby oil,dont you guys watched yomega mania?
13 years ago on Introduction
does this really work ?
14 years ago on Introduction
I just use the oil for door hinges...
14 years ago on Introduction
I didn't know this works.
Does this work with skateboarding bearings as well?
Reply 14 years ago on Introduction
Defiantly not because it's so thick. Also don't use WD-40 on bearings because it creates a thin film which attracts dirt and grim, something you don't want. I would suggest Tri-flow or Bone Swiss Cream.
14 years ago on Introduction
Yea it does but it requires more frequent cleaning id put my bearings in paint thinner every week.
14 years ago on Introduction
Cool!
14 years ago on Introduction
Anyone who likes yo-yoing should chec out my group at https://www.instructables.com/group/yo-yo
14 years ago on Introduction
Interesting recipe. : )