Make Your Own Yoyo Lube
Intro: Make Your Own Yoyo Lube
I have been wanting some yoyo lube but I can't find any around where I live and all the lube on the Internet costs too much, so I decided to try and make my own and here it is it works very well.
Items needed:
vastiline
WD-40 or some other lubricant
small container
cotton ear swabs
bearing yoyo
small stick or something to stir with
Items needed:
vastiline
WD-40 or some other lubricant
small container
cotton ear swabs
bearing yoyo
small stick or something to stir with
STEP 1: Vastline
Add about 2 table-spoons of vastline to your container.
STEP 2: WD-40
Add some WD-40 i spray it for about two and a half seconds.
STEP 3: Stir
Stir your concoction of WD-40 andvastiline for about one minute.
STEP 4: Apply
Apply this sticky slick combonation to your yo-yo bearing with an ear swab. And there you have it your own homeade yoyo lube.
11 Comments
mrawan22 4 years ago
hockeymath 8 years ago
It is good
mastermakoko 14 years ago
flyer1225 14 years ago
Batryn 15 years ago
GorillazMiko 16 years ago
Does this work with skateboarding bearings as well?
ilovetea 16 years ago
napalm008 16 years ago
LinuxH4x0r 16 years ago
napalm008 16 years ago
bhunter736 16 years ago