Introduction: Make Yourself a Homemade Clock With Thermometer Using ATMEGA128

In this step by step I wanna share my experiment with ATMEGA128 timer and interrupt using DS1307 and NTC to display homemade clock and thermometer.
It displays hour,minute,second, day of week, day of month, month, and year, and the temperature in celcius

Enjoy the project...

Step 1: Prepare All the Parts for This Project

This project will need these parts :
1. ATMEGA128 board
2. ATMEGA 128 chip
3. DS1307 module
4. USBASP for debugging
5. AVRStudio
6. NTC,

Please have a look on the photo

Step 2: Assemble All the Parts Together

After we prepare all the parts, we need to assemble them together,
Here are the ports I used for them :

#define lcd_data_pin PORTA

#define en PORT_D.b0
#define rs PORT_D.b1
#define rw PORT_D.b2

ADMUX=(1<<REFS0 | ADC_0);                  //Conversion on channel 0, thermistor input

Step 3: Define the Variable for DS1307

I defined a variable for DS1307 like this :
// DS1307 Register Address
// Second: ds1307_addr[0]
// Minute: ds1307_addr[1]
// Hour  : ds1307_addr[2]
// Day   : ds1307_addr[3]
// Date  : ds1307_addr[4]
// Month : ds1307_addr[5]
// Year  : ds1307_addr[6]

Connect SCL to PD0 and SCK to PD1 to retrieve / read data from DS1307

Step 4: Test and Enjoy Your New ATMEGA128 Clock and Thermometer

Test and enjoy your new ATMEGA128 Clock and thermometer
Let's watch the video for this project in action

Thanks for reading and good luck for your project....;)
Pocket Sized Electronics

Participated in the
Pocket Sized Electronics

Epilog Challenge V

Participated in the
Epilog Challenge V