Making an Arduino Powered Curtain Automation
Intro: Making an Arduino Powered Curtain Automation
In this video I start work on showing you how to make an Arduino Powered device that will open and close curtains!
By using some rope and a continuous rotation servo I am able to create a pulley system that will serve as the backbones to the movement system.
This is the first part where I 3D print the pulleys and the main control box and test the mechanical systems.
In the next episode we will wire everything up and program it!
4 Comments
nayana satpute 7 years ago
I would to know details about all accessories required for the project
riaz.sulaimi 7 years ago
SapK 9 years ago
WOuld like to know the parts list used for this project.
cartiman 9 years ago
thanks you. It's very usefull