Introduction: Me and KnexBulid's Project

Here is a railgun me and KnexBuild are working on. This is what we have so far, its getting closer to  completion but we're working on it. This ible is really just ment for KnexBuild and I but you guys can add some feedback if you wish.

FOR KNEXBULID: UPDATE 1 So this is the prototype I pm'ed you about it contains the new trigger, over vacation can you give it a mag of some sort and try to improve the trigger, I won't be active all vacation. 

UPDATE 2: This is the new trigger, ok there the new pictures are there the last pic is the part that resets the trigger (non-

For Didexo: UPDATE 3: I have made a new trigger, pin and handle. The trigger should be able to take a lot of pressure.

UPDATE 4: I made and added a stock. Also, added a new and better handle and made a dot sight.

UPDATE 5: New trigger still can hold same amount of pressure, details explaned in the video, slighty different handle

Update 6: I made limbs pictures will be up later

For Didexo: UPDATE 7: Here is the magazine area. It has a removable, top loading magazine the can hold 8 yellow rods. The
magazine can be put in and taken out at any time. The gun also has a magazine release.

For Didexo: UPDATE 8: Here is my working prototype. It gets only about 50 feet. The gun uses bending crossbow limbs. Sorry for the blur; my camera didn't want to focus for some reason.