Hi everyone, today I will teach you how to make a steering car with our micro:bit Wonder Building Kit, the principle is very simple, mainly using the rack and pinion steering gear and the unstable structure of the parallelogram.

Supplies

Video link: https://youtu.be/zTS86USkYo8

Step 1: Materials Required:

BBC micro:bit V2 x 2

micro:bit Wonder Building Kit x 2

Joystick:bit 2 Kit x 1

Step 2: Build-up Steps in PDF:

micro:bit-Steering-Car.pdf

Step 3: Hardware Connection:

Connect the motor and servo to the M2 and S1 ports on the Wukong expansion board respectively.

Step 4: Car Program:

Link: https://makecode.microbit.org/_6w5gFx8mcKuP

Step 5: Joystick:bit Program:

Link: https://makecode.microbit.org/_hVp5VU4szJJe

After downloading the programs for the car and Joystick:bit, you can control your Steering Car just like the video at the beginning of the article.

If you have any ideas or opinions, please feel free to contact us via services@elecfreaks.com.

Micro:bit Steering Car

Supplies

Step 1: Materials Required:

Step 2: Build-up Steps in PDF:

Step 3: Hardware Connection:

Step 4: Car Program:

Step 5: Joystick:bit Program:

Recommendations

Introduction: Micro:bit Steering Car

Supplies

Step 1: Materials Required:

Step 2: Build-up Steps in PDF:

Step 3: Hardware Connection:

Step 4: Car Program:

Step 5: Joystick:bit Program:

Recommendations

All Things Pi Contest

Make it Resilient

Green Future Student Design Challenge