Minecraft 3x3 Door - NO PISTONS!!!!!

23,580

10

20

Introduction: Minecraft 3x3 Door - NO PISTONS!!!!!

What you'll need:

  • 18 command blocks
  • 9 blocks of your choice (for the door)
  • Redstone Dust
  • 1 lever or button

Step 1: Create the Door

Place the 9 blocks of your choice to make a 3x3 square.

Step 2: Place the On/Off Switch/Button

Place your switch/button two blocks away from the door to the left or right. I, for example, put mine on the left.

Step 3: Place the Command Blocks & Redstone

Look at the picture above. IT IS VERY IMPORTANT THAT YOU PLACE THE COMMAND BLOCKS, OR GATES, AND REDSTONE AS SHOWN IN THE PICTURE, however. If you are experienced with redstone then you might be able to edit the layout, but I do not recommend doing so.

Step 4: Code the Command Blocks

NOTICE: THIS IS THE HARDEST PART!

Start by going into every command block and typing "setblock".

Next, find the coordinates for every block of the wall and enter the coordinates into Section A & B.

Don't understand what I mean? Here's an example:If the bottom left block of the wall's coordinates were "X: 200 Y: 40 Z: 200" then I'd enter that into one command block in each section, so that the command in the two command blocks looks like this: "setblock 200 40 200".


Now, enter the id of the block of the wall into Section B.

For example, if my entire wall was going to be iron blocks then I'd put "42" or "minecraft:iron_block" into all of the command blocks in Section B. Then it should look something like this: "setblock 200 40 200 minecraft:iron_block"

Finally, in Section A do the same thing that I said in the example, but put "0" or "minecraft:air" instead of the block the wall is made out of.

Step 5: Check It!

Now, check that what you've made looks nearly exactly like the picture above.

Step 6: Test It Out! (Video)

Now you've successfully made a silent, fast, reliable, and new 3x3 Command Block door! Enjoy!

Be the First to Share

    Recommendations

    • Pi Day Speed Challenge

      Pi Day Speed Challenge
    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Sculpt & Carve Challenge

      Sculpt & Carve Challenge

    20 Comments

    Hmmm that's a cool design, you'll have to show us if you come up with any other applications for this design.

    0
    dan3008
    dan3008

    Reply 6 years ago on Introduction

    setblock has one hundreds of uses. I've used it to build a bridge thats activated by a switch, or my personal favorite was to use a timer circuit to build a moving bridge :)

    0
    Max490
    Max490

    Reply 6 years ago on Introduction

    Cool! I've never thought of using the /setblock command to create a moving effect. I'll have to try that out.

    0
    callahanelias-100
    callahanelias-100

    Reply 17 days ago

    wait you guys used setblock, oh i just used the fill command

    0
    dan3008
    dan3008

    Reply 6 years ago on Introduction

    I've started on an instructable for making a moving platform bridge with "/setblock" So i'll let you know when its done.

    Got destracted mid make, by someone loging on to my build server and starting destroying things :(

    0
    Max490
    Max490

    Reply 6 years ago on Introduction

    Well, you're in luck. I have found out another way to make this kind of door. Instead of using the /setblock command you can use some other command, which I forgot, that's basically like copy & paste.

    I'll have to make another Instructable showing how to make it.

    0
    Henryworks
    Henryworks

    5 years ago on Introduction

    This is awesome! but I made some ajustments, now it looks like a door is opening, not "its there" "bop! now it isn't"

    0
    Lasanga4
    Lasanga4

    Reply 1 year ago

    Howd you do it?

    0
    Very CreepyC
    Very CreepyC

    Reply 5 years ago

    same here

    it is amazing tho

    0
    hl9019145
    hl9019145

    Question 2 months ago on Step 6

    could you do it with out comand blocks?

    0
    callahanelias-100
    callahanelias-100

    Answer 21 days ago

    no you can't do it without command blocks

    0
    cars367
    cars367

    6 years ago

    How do you get the command blocks

    0
    callahanelias-100
    callahanelias-100

    Reply 21 days ago

    in the chat you type /give @a command_block

    0
    BlueRobot
    BlueRobot

    Reply 6 years ago

    Type in the chat "/give command_block "

    0
    BlueRobot
    BlueRobot

    Reply 6 years ago

    Sorry, it deleted part of my comment. Try this link: http://minecraft.wikia.com/wiki
    /Commands

    It has the list of commands:)

    0
    Lasanga4
    Lasanga4

    Question 1 year ago on Step 4

    If it is water do you put water_buck_?

    0
    wbarnes24
    wbarnes24

    Answer 1 year ago

    If I’m correct it should just be water but if that doesn’t work then try water_block

    0
    Lasanga4
    Lasanga4

    Question 1 year ago on Step 3

    Do you HAVE to put the command blocks right next to the button? I made a fence and I dont want it to look super bulky since it is also in a tighter space