Minecraft Fully Auto Tnt Cannon

Intro: Minecraft Fully Auto Tnt Cannon

Just a little explosive fun.

STEP 1: Find Your Location, It Should Be Raised.

STEP 2: Build a Flat Platform

STEP 3: Build Dispensers in This Pattern

STEP 4: Put Blocks on Top of the Dispensers Like This

STEP 5: Now Roof It in and Build These Walls

STEP 6: Put a Fence in the Bottom Towards the Front

STEP 7: Put a Pressure Pad on Top of It

STEP 8: Fill the Farthest Back Parts With Water on 1st and 2nd Layers

STEP 9: Put Redstone on Like This

STEP 10: Just a Little More

STEP 11: Make Sure It Works

STEP 12: Break the Torch

STEP 13: Break and Replace One Redstone to Send It Into Clock Mode

STEP 14: Turn Off and Fill the Dispensers With Tnt

STEP 15: Set Back Into Clock Mode

STEP 16: Enjoy the Fireworks

STEP 17:

Comments

[monst3rleg3nd]

with a tnt cannon you want to set of the power (tnt that causes the launch) before the scatter (the tnt that get launched or sent forwards) if you dont want to blow your tnt cannon and yourself up

[bobjeffry123]

how do you set it into clock mode

[XxTastyPillxX]

you make the circuit as it is shown, then you break and replace one redstone VERY QUICKLY

[XxTastyPillxX]

well, after it is turned on by the torch

[Cosmicblox]

Man it damn hard and I guess there are better versions of it

[thunderstar6097]

The type of clock above does not work in versions such as 1.5.2 and below. You need a much different clock for those versions such as this. And this one works in all versions where you have redstone comparators

[Mousepotato33]

Minecraft TNT cannon