Mini Lego AK-47

19K5527

Intro: Mini Lego AK-47

This will show how to make a mini model of an AK-47 machine gun out of legos.

STEP 1: The Pieces

Here are the pieces needed.

STEP 2: The Ammo Clip

Attach the black side coupling brick to the 1x2 plate as shown.

STEP 3:

Add the curve brick next to that.

STEP 4:

Stick the vent brick on top.

STEP 5: The Barrel

Attach a clamp to the brown square.

STEP 6:

Put a black square on the clamp.

STEP 7:

Put the two cylinders on the square.

STEP 8:

Put the small rod in the hole in the top cylinder.

STEP 9:

Attach the finished part to the ammo clip.

STEP 10: The Stock

Put the brown side coupling brick on the slope piece.

STEP 11:

Put the black stud on that.

STEP 12:

Put a clamp on that.

STEP 13:

Clip the pistol into the clamp.

STEP 14:

Put a clamp facing away from the last one.

STEP 15:

Put the finished stock on the back of the ammo clip.

STEP 16: The Scope

Put the antenna through the top of the cone as shown.

STEP 17: Done!

Clip the scope to the gun as shown.

And your done!

17 Comments

I like it. I made my own AK47 with a minifigure rifle, a hand as the ammo, and a LEGO Technic piece.

Can yo make a robot hold if ao can there be an instructable on it
Thats my favourite gun!!! you can hold it in one hand and it will remain balance...and it's waterproof!
WOW!!! I saw this and just HAD to make it. My version's kinda bad though..the stock is grey, the scope mounts are grey, and I can't find my pistol for the trigger! Five stars!!!!!!!!!!!!!!!!!!!!!
This thing is SO awesome! Good job!
it's about 5 inches long, more of a model. but you can build a robot to hold it (i'm building one).
Mr Kalashnikov and Kalishna Kitty are both pleased..... That rocks man
If you took the brown side coupling brick out, took the scope off, 1 of the brown cylinders, and shorten the rod (barrel)..... It could be a Yugoslavian paratrooper model!!!!! Google image an AK. Do you know how many different versions there are?